301 Tee Splicer
Compression type fingers crimp around cable. Made from 14 gauge copper or 10 gauge aluminum stock. For use with all main size conductors on Class I structures only. UL Listed
A301 Aluminum
C301 Copper
C301L Lead Coated Copper
303 Straight Splicer
Compression type fingers crimp around ends of cable for a straight connection. Made from 14 gauge copper or 10 gauge aluminum stock. For use with all main size conductors on Class I structures only. UL Listed
A303 Aluminum
C303 Copper
C303L Lead Coated Copper
305 parallel splicer
Compression type fingers crimp around cable. Made from 14 gauge copper or 10 gauge aluminum stock. For use with all main size conductors on Class I structures only. UL Listed
A305 Aluminum
C305 Copper
C305L Lead Coated Copper
309 Parallel Splicer
Cast parallel splicer with one carriage bolt and 1-1/2″ of contact on cables or wires. Designed so bolt does not come through bottom of splicer and penetrate roof membrane. May be used with full size cables and secondary bonding wire. UL Listed
A309 Aluminum
C309 Bronze
C309L Lead Coated Bronze
310 Cast Parallel Splicer
Parallel cable splicer with single bolt tension and 1-1/2″ of contact on cables and wires. Splicer may be used with full size cables or secondary bonding wire. UL Listed
A310 Aluminum
C310 Bronze
C310L Lead Coated Bronze
C311 Parallel Splicer
Parallel cable splicer with double carriage bolt tension and 2″ of contact on cable and wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed.
A311 Aluminum
C311 Bronze
C311L Lead Coated Bronze
312 Parallel Splicer
Parallel cable splicer with one carriage bolt. Splicer may be used with rod, cable, or bonding wire where less contact is acceptable. UL Listed
A312 Aluminum
C312 Bronze
C312L Lead Coated Bronze
313 Cast Straight Splicer
Cast aluminum of brass straight splicer has four bolt cable tension two per cable. Splicer used to butt ends of cable in straight line. UL Listed.
A313 Aluminum
C313 Bronze
C313L Lead Coated Bronze
314 Cast Parallel Splicer
Cast parallel cable splicer with double bolt tension and 4″ of contact on cable or wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed
A314 Aluminum
C314 Bronze
C314L Lead Coated Bronze
315 Cast Parallel Splicer
Cast parallel cable splicer with double bolt tension and 2″ of contact on cable or wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed
A315 Aluminum
C315 Bronze
C315L Lead Coated Bronze
Bimetallic Splicers
A320 Bimetallic Splicer
Bimetallic connector for making connections between aluminum and copper cables in a straight line. Two-bolt tension on each cable for making a strong connection. Use with all main size conductors. UL Listed
A320 Aluminum to Copper Bimetallic
A322 Bimetallic Splicer
323 Disconnects
Bimetallic connector for making connections between aluminum and copper cables. Single bolt tension caps allow the cables to come from a variety of directions. Use with all main size conductors. Eliminates use of additional splicer. UL Listed
A322 Aluminum to Copper Bimetallic
Cast aluminum or bronze cable disconnect used for testing system continuity or ground resistance. Single bolt tension caps allow for easy disconnection.
A323 Aluminum to Aluminum Disconnect
C323 Copper to Copper Disconnect
325 Cast Tee Splicer
Tee Splicer has bolt tension for connections will all main size conductors. UL Listed
A325 Aluminum
C325 Bronze
C325L Lead Coated Bronze
327 Cross Run Splicer
Cross run cable connector has 1-1/2″ of contact with four bolt tension. For use with all full size cables. UL Listed.
A327 Aluminum
C327 Bronze
C327L Lead Coated Bronze
Bonding Clamps, Plates and Lugs
404 Cast Bonding Plate
Cast aluminum or bronze bonding plate with 3 square inches of contact. Bolt tension cap can be turned so cables can run horizontal or vertical. For use with all full size cables. UL Listed.
A404 Aluminum
C404 Bronze
C404L Lead Coated Bronze
406 Stamped Bonding Plate
Stamped aluminum or copper bonding plate with 8 square inches of contact. Bolt tension cap provides maximum cable support. For use with all full size cables. UL Listed.
A406 Aluminum
C406 Copper
C406L Lead Coated Copper
407 Stamped Finger Bonding Plate
Stamped aluminum or copper bonding plate with 8 square inches of contact. Compression type fingers crimp over cable for easy installation. Available for Class I structures only. For use with all full size cables.
A407 Aluminum
C407 Copper
C407L Lead Coated Copper
410 Cast Bonding Plate
Flat metal bonding plates with 8 square inches of contact surface. Holes provided for 1/4″ bolts or smaller screws. Bolt tension cap can be turned so cables can run any direction. For use with all full size cables. UL Listed
A410 Aluminum
C410 Bronze
C410L Lead Coated Bronze
411 Cast Bonding Plate
Cast aluminum or bronze bonding plate with 8 square inches of contact. Bolt tension cap has 1-1/2″ of contact. For use with all full size cables. UL Listed.
A411 Aluminum
C411 Bronze
C411L Lead Coated Bronze
412 Bonding Lug
Bonding lug with 3 square inches of contact surface. Available for bolt sizes 1/4″, 3/8″, 1/2″, and 5/8″ diameter. Bolt tension cap can turn so cable can be connected from any direction. For use with all full size cables. Specify bolt size when ordering. UL Listed.
A412 Aluminum
C412 Bronze
C412L Lead Coated Bronze
414 C-Clamp Bonding Clamp
Bonding plate has 8 square inches of surface contact. C-type clamp allows easy installation on I-beams or other flat areas. Bolt tension cap has 1-1/2″ of cable contact. For use with all full size cables. UL Listed
A414 Aluminum
C414 Bronze
C414L Lead Coated Bronze
416-417 Pipe Clamp
Pipe grounding clamp with 1-1/2″ of contact. Available in three pipe sizes. For use with full size cables. UL Listed.
Pipe Range .750″ to 1.315″ O.D. Pipe Range 1.750″ to 2.500″ O.D.
A416 Aluminum A418 Aluminum
C416 Bronze C418 Bronze
C416L Lead Coated Bronze C418L Lead Coated Bronze
Pipe Range 1.315″ to 1.900″ O.D.
A417 Aluminum
C417 Bronze
C417L Lead Coated Bronze
420 Gutter Clamp
Gutter clamp with compression fingers to crimp over gutter edge and cable. Use with all full size cables. Available for Class I structures only. UL Listed
A420 Aluminum
C420 Copper
C420L Lead Coated Copper
1″ U-Bolt Bonding Clamp
2″ – 6″ U-Bolt Bonding Clamps
Cast aluminum or bronze u-bolt pipe clamps. Provides 1-1/2″ of contact on pipe and cable. Use with all full size conductors. Fits pipe sizes 1/2″ to 6-3/4″. UL Listed.
1″ U-Bolt fits 1/2″ 1 1/4″ O.D. pipes
A421 Aluminum
C421 Bronze 4″ U-Bolt fits up to 4-1/2″ O.D. pipes
C421L Lead Coated Bronze
A424 Aluminum
2″ U-Bolt fits up to 2″ O.D. pipes C424 Bronze
C424L Lead Coated Bronze
A422 Aluminum
C422 Bronze
C422L Lead Coated Bronze 6″ U-Bolt fits up to 6-3/4″O.D. pipes
3″ U-Bolt fits up to 3″ O.D. pipes A426 Aluminum
A423 Aluminum C426 Bronze
C423 Bronze C426L Lead Coated Bronze
C423L Lead Coated Bronze
430 Secondary Bonding Clamp
Cast aluminum or bronze bolt tension secondary bonding lug for connections to VTRs, roof drains, flashings, etc. For use with secondary wire. UL Listed
A430 Aluminum
C430 Bronze
C430L Lead Coated Bronze
432 Secondary Bonding Lug
Terminal bonding lug with 2 bolt tension on secondary wires. Lug can be secured with a screw, 1/4″ drive-in anchor, or 1/4″ bolt. For use with all secondary wires. UL Listed.
A432 Aluminum
C432 Bronze
C432L Lead Coated Bronze
433 Secondary Bonding Lug
Cast soft aluminum or bronze secondary terminal bonding lug. Compression type fingers crimp over cable for easy installation. Lug hole is 1/4″. Use with #6 or #4 miniature solid bonding wire. For Class I structures only.
A433 Aluminum
C433 Bronze
C433L Lead Coated Bronze
434 Secondary Bonding Clamp
Cast aluminum or bronze bolt tension bonding clamp secures to I-beams, purlin flange, etc. For use with all full size cables and secondary wires. For secondary bond only. UL Listed
A434 Aluminum
C434 Bronze
C434L Lead Coated Bronze
Flexible Bonding Strap
Extra flexible bonding cable for use in moving or vibrating metal objects. 3/4″ X 1/8″ thick. Two sizes standard 10″ and 12″. Any size can be fabricated.
10″ Strap
A435 Aluminum
C435 Tinned Copper
12″ Strap
A436 Aluminum
C436 Tinned Copper
Secondary Bonding Strap
1-1/4″ wide aluminum or tinned copper strip with a secondary terminal lug (catalog number 432) attached. Fits all secondary wires. Any size strap can be fabricated. UL Listed.
A438 Aluminum strap for 2″ pipe
C438 Tinned copper strap for 2″ pipe
A439 Aluminum strap for 4″ pipe
C439 Tinned copper strap for 4″ pipe
Primary Bonding Strap
1-1/4″ wide aluminum or tinned copper strip with a parallel cable connector (catalog number 310) attached. Fits all main size cables and secondary wires. Any size strap can be fabricated. UL Listed.
A442 Aluminum strap for 2″ pipe
C442 Tinned copper strap for 2″ pipe
A444 Aluminum strap for 4″ pipe
C444 Tinned copper strap for 4″ pipe
A446 Aluminum strap for 6″ pipe
C446 Tinned copper strap for 6″ pipe
A448 Aluminum strap for 8″ pipe
C448 Tinned copper strap for 8″ pipe
Primary Water Pipe Bonding Strap
2″ wide aluminum or tinned copper strip with a parallel cable connector (catalog number 310) attached. Fits all main size cables. Any size strap can be fabricated. UL Listed.
A452 Aluminum strap for 2″ pipe
C452 Tinned copper strap for 2″ pipe
A454 Aluminum strap for 4″ pipe
C454 Tinned copper strap for 4″ pipe
A456 Aluminum strap for 6″ pipe
C456 Tinned copper strap for 6″ pipe
A458 Aluminum strap for 8″ pipe
C458 Tinned copper strap for 8″ pipe
A460 Aluminum strap for 10″ pipe
C460 Tinned copper strap for 10″ pipe