702 Loop
1/2″ wide strip secure with a single nail or screw. For use with all Class I cables or secondary bonding wires.
A702 Aluminum
C702 Copper
C702L Lead Coated Copper
704 Loop
5/8″ wide strip secure with a single nail, screw, 1/4″ bolt, or 1/4″ drive-in anchor. For use with all cables or secondary bonding wires.
A704 Aluminum
C704 Copper
C704L Lead Coated Copper
706-707 Protector Pipe Strap
Tinned copper strip with one fastening hole. Used to secure catalog numbers C630, C631, and P632 protector pipes. C706 fits pipe up to 3/4″ O.D. and C707 fits around 1″ O.D PVC.
C706 Tinned copper strap for up to 3/4″ O.D.
C707 Tinned copper strap for up to 1″ O.D.
G708 Wood Protector Strap
Galvanized steel strap used for securing catalog number P633 wood protector. Provided with two 5/16″ mounting holes.
G708 Galvanized steel strap
710 Stand-off Cable Holder
Cast aluminum or bronze stand-off cable holder.Use with 3/8″ lead expansion anchor.
A710 Aluminum
C710 Bronze
711 Cast Adhesive Cable Holder
Cast aluminum or bronze adhesive cable holder with bolt tension cable clip. For use with all full and secondary cables.
A711 Aluminum
C711 Bronze
C711L Lead Coated Brass
712 Stamped Adhesive Clip
Three compression type fingers hold the cable securely to the roof. Middle finger stamped so the adhesive does not interfere with the anchoring process. For use with all cables and bonding wires.
A712 Aluminum
C712 Brass
C712L Lead Coated Brass
714 Standing Seam Clip
Cable holder for standing seam has a 3/4″ groove to fit over most seams. Cable holder is adjustable so cables can run perpendicular or parallel. Single set screw holds clip to seam. Loop and cable anchored to clip using self tapping screw (catalog number S725) or 1/4″ bolt (catalog number S732).
Clip with self tapping screw Clip with 1/4″ bolt
A713 Aluminum A714 Aluminum
C713 Bronze C714 Bronze
C713L Lead Coated Bronze C714L Lead Coated Bronze
Cable to Pipe Straps
Secures full size cable to pipes. Four sizes are standard but any size can be fabricated.
A715 Aluminum — pipe size 1.900″ O.D.
C715 Tin Plated Copper — pipe size 1.900″ O.D.
A716 Aluminum — pipe size 2.375″ O.D.
C716 Tin Plated Copper — pipe size 2.375″ O.D.
A717 Aluminum — pipe size 3.500″ O.D.
C717 Tin Plated Copper — pipe size 3.500″ O.D.
A718 Aluminum — pipe size 4.500″ O.D.
C718 Tin Plated Copper — pipe size 4.500″ O.D.
P720 Rubber Expansion Anchor
P720 1/4″ X 1″ Rubber expansion anchor
Stainless Steel and Copper Nails
C722 2″ Copper Roofing Nail
S722 6d stainless steel ring shank nail 2″ length
S723 8d stainless steel ring shank nail 2-1/2″ length
Stainless Steel Self Drilling Screw
S725 #10 X 1″ self drilling screw
S726 #10 X 1-1/4″ self drilling screw
S727 #10 X 1-1/2″ self drilling screw
P729 Drive-in Anchor
P729 1/4″ X 1-1/4″ Drive-in anchor
Stainless Steel Bolts
HEX HEAD BOLTS
S730 1/4″ X 1/2″ S740 5/16″ X 2″
S731 1/4″ X 3/4″ S741 3/8″ X 3/4″
S732 1/4″ X 1″ S742 3/8″ X 1″
S733 1/4″ X 1-1/4″ S743 3/8″ X 1-1/4″
S734 1/4″ X 1-1/2″
S735 5/16″ X 3/4″ S745 3/8″ X 2″
S736 5/16″ X 7/8″ S746 1/2″ X1/2″
S737 5/16″ X 1″
S738 5/16″ X 1-1/4″ CARRIAGE BOLTS
S739 5/16″ X 1-1/2″ S739CB 5/16″ X 1-3/4″
Flat Washer
Stainless Steel Brass
S750 1/4″
S751 5/16″
S752 3/8″
S753 1/2″
S754 5/8″ C754 5/8″
Lock Washer
Stainless Steel
S755 1/4″
S756 5/16″
S757 3/8″
S758 1/2″
Neoprene Washer
P760 #10
P761 1/4″
P762 5/16″
P763 3/8″
P764 1/2″
Nut
Stainless Steel Brass
S770 1/4″
S771 5/16″
S772 3/8″
S773 1/2″
S774 5/8″ C774 5/8″
SDSA 1175 Arrester
Secondary surge arrester designed to protect against lightning surge damage. 120/240 VAC. Diagnostic LED light. UL Listed
SDSA 1175 Arrester
Lead Expansion Anchor
P776 1/4″ Lead Expansion Anchor
P778 3/8″ Lead Expansion Anchor
P779 1/2″ Lead Expansion Anchor
P780 Silicone Sealant
P780 100% silicone rubber sealant 10 oz tube.